This system allows you to wash small and medium sized mechanical parts successfully.
The treatment is performed manually by means of two gloves fitted on the front part. The cleaning results are ensured by a high pressure pump and the special spray nozzle. The latter can be quickly replaced with the cleaning brush thanks to the quick attachments.
The machine is equipped with a compressed air gun for drying the parts and extracting the vapours produced inside the chamber.
Models
- LP3, washing capacity of 95 x 70 x H55 cm x 70kg
- LP4, washing capacity of 120 x 80 x H55 cm x 70kg
Versions
- pneumatic for solvents (P)
- electric, maximum washing temperature: 60°C (C)
Supply voltage
- compressed air (pneumatic version)
- 230V 1PH+T 50 HZ (electric version)
Standard equipment
- Vapour extraction via Venturi compressed air system with throttle valve
- Interchangeable pressure washing nozzle and brush with quick attachment
- Compressed air blowing gun
- Removable panels in stailness steel Aisi 304 between the washing chamber and tank
- Closing door with hoses and integrated tempered glass
- Assisted door closing with gas spring and hook
- Filter on pump suction (500 µ)
- Washing activation by pedal
- Safety microswitch on door opening
- Plates in stainless steel
Specific equipment in electric version
- Electric pump
- External neon light for interior lighting
- Heating resistor in Incoloy stainless steel
- Minimum tank level control to protect pump and resistor
- Minimum level sensor
- blow gun
- relief valve
- Black latex gloves (600 mm)
Specific equipment in pneumatic version
- stainless steel cartridge filter (10/25/50micro)
- heater with external resistors that are not in contact with the liquid
- weekly heating start programmer
- Submerged magnet for separation of ferritic abrasive powder
- machine equipped with wheels for handling
- increased load capacity to 150 kg
| Technical table | LP3 | LP4 |
|---|---|---|
| Closed machine overall dimensions (WxDxH) | 120 x 85 x 170 cm | 145 x 95 x 180 cm |
| Open machine overall dimensions (WxDxH) | 120 x 100 x 175 cm | 145 x 110 x 185 cm |
|
Washing capacity (WxDxH) |
95 x 70 x 55 cm | 120 x 80 x 55 cm |
| Basket load capacity | 70 kg | 70 kg |
| Washing tank capacity | 75 lt | 90 lt |
|
Washing pump electric models |
1,5 kw 8,0 bar 10 lt/min |
1,5 kw 8,0 bar 10 lt/min |
|
Washing pump pneumatic models |
5,0 bar
2 lt/min |
5,0 bar
2 lt/min |
| Washing heating electric models | 2,0 kw | 2,0 kw |
| Supply electric models |
230V
1PH+T |
230V
1PH+T |
| Supply pneumatic models |
comp. air
6 bar |
comp. air
6 bar |
| Comp. air consump. electric models (except blowing) |
10 lt/min
0,6 mc/h |
10 lt/min
0,6 mc/h |
| Comp. air consump. pneumatic models (except blowing) |
20 lt/min
1,2 mc/h |
20 lt/min
1,2 mc/h |
| Connections table | LP3 | LP4 |
| Drain washing tank | F 1" Gas | F 1" Gas |
| Vapour extraction disch. | D 55 mm | D 55 mm |
| Compressed air inlet | F 1/4" Gas | F 1/4" Gas |
| Table of dimensions | LP3 | LP4 |
| L (width) | 120 cm | 145 cm |
| P (depth) | 85 cm | 95 cm |
| H (height) | 175 cm | 185 cm |
| LL (washing width) | 95 cm | 120 cm |
| PL (washing depth) | 70 cm | 80 cm |
| HL (washing height) | 55 cm | 55 cm |
| PA (open depth) | 100 cm | 110 cm |
| AC (load height) | 100 cm | 100 cm |
| HA (opening angle) | 55° | 55° |
